# FAQ: Where can I set a crossfade? --- ## How To Configure Crossfade You can set a crossfade of 0-10 seconds from the Zone Picker. Click the current zone on the right side of the bottom bar, then in the pop up window click the 3 dots menu and select Zone Settings. <img src='http://roon-kb.s3.amazonaws.com/16878d3a-088b-4f2f-80bb-089e778686c4.png'/> Here you can use the drop down to set your crossfade. <img src='http://roon-kb.s3.amazonaws.com/ed04d707-0630-49a9-bd0d-381401bcc7f8.png'/> #### Another Quick Way to Access Crossfade - You can also access Crossfade by right clicking (or long press) the Zone Picker at the bottom right of the screen. From there, select Zone Settings. <img src='http://roon-kb.s3.amazonaws.com/809a3bcb-c4e0-4581-b5dc-6b82a5172faa.png'/> ## What content will Roon crossfade? When will Roon not crossfade? Roon will crossfade content when: - Both tracks are the same sample rate and bit depth - Your Core has enough time to calculate the crossfade Roon needs some time to calculate the crossfade, so if you have a 5 second crossfade set, you may not hear a fade if you seek right near the end of the track. Also note that crossfade works better when your collection has been fully analyzed, as Roon detects silence at the start and end of your tracks, and will only fade to actual audio content once your files have been analyzed. Finally, note that in order to crossfade DSD content, it will be automatically converted to PCM.
Page last changed Mon Jan 30 2017